Avaya Bay Command Console Manual de usuario descargar pdf (Pagina 74)

Using the Bay Command Console (BCC™)

4-2

117383-B Rev. 00

4. Use the save command to save your configuration as a bootable (binary) file

on the device.

5. Exit BCC configuration mode, exit the BCC to the Technician Interface, and

log out of the device.

You may find it helpful to first diagram what you want to configure in terms of the

BCC configuration tree or hierarchy for the device. For example, refer to the

following sample router configuration.

Sample Router Configuration

The following example shows a sequence of commands you can use to configure a

BCN router on a network. Assumptions for this example are that you first

complete the physical installation of the router, then boot the router using the

image (bn.exe) and the minimum configuration file (ti.cfg).

This example creates the following objects in the total router configuration

(Figure 4-1

• IP (global)

-- ARP (global) on IP

-- RIP (global) on IP

• SNMP (global)

-- Community “public” on SNMP

- Manager (address 0.0.0.0) on Community “public”

• FTP (global)

• TFTP (global)

• Telnet (global)

-- Server (global) on Telnet

• Quad Ethernet interface in slot 13

-- IP interface (address 192.168.133.114) on Ethernet connector 1

- ARP on IP interface 192.168.133.114

- RIP on IP interface 192.168.133.114

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 119 120

Sin comentarios

Avaya Bay Command Console Manual de usuario Pagina 74