Avaya Configuring BayStack Remote Access Manual de usuario descargar pdf (Pagina 62)

Configuring BayStack Remote Access

3-10

117341-B Rev. 00

Setting Up Routing Paths for Netboot

You set up the routing paths between the BootP server and the BayStack routers

by:

• Enabling each router interface in the paths to the BayStack routers

• Creating a BootP relay agent forwarding table for each router in a path

• Creating a BootP client interface table for the upstream router when the

BayStack router is on a Frame Relay PVC in group access mode

Enabling Router Interfaces

You must enable BootP relay (also called BootP pass-through or gateway) on all

interfaces in the paths between BayStack routers and the BootP server. For

example, you would enable BootP relay on the interfaces indicated in Figure 3-1

Figure 3-1. Enabling BootP Relay in a Sample Network

Enable BootP on

these interfaces

Corporate backbone

Booting routers

BootP server

NPA0007A

BayStack router BayStack router BayStack router

Upstream router

WAN

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 137 138

Sin comentarios

Avaya Configuring BayStack Remote Access Manual de usuario Pagina 62