Avaya Configuring BayStack Remote Access Manual de usuario descargar pdf (Pagina 51)

Setting Up a UNIX Boot Server

117341-B Rev. 00

2-11

<gateway> is the IP address of the network destination to which packets will be

addressed.

<hops> is the number of hops to the network destination.

Verifying the Routes

After adding a static route for each path to the BayStack routers, enter the

following command to display the routing table and verify the routes you added:

netstat -r

Loading the Changes into Memory

Once you modify the /etc/inetd.conf file, you must force the operating system to

reread it by rebooting the workstation or by issuing a hang-up signal.

In most cases, reboot the workstation. Issue a hang-up signal if the workstation is

performing a task that you do not want to interrupt.

Rebooting Your Workstation

To reboot your workstation:

root

Enter the following command:

/etc/shutdown now -r

The -r flag reboots the workstation.

Issuing a Hang-Up Signal

To issue a hang-up signal:

root

Enter the following command to hang up on the

inetd

process:

ps -aux | grep inetd

The system displays a line similar to this one:

root 148 0.0 0.0 48 0 ? IW Sept 14 0:07 inetd

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 137 138

Sin comentarios

Avaya Configuring BayStack Remote Access Manual de usuario Pagina 51