Avaya Configuring BayStack Remote Access Manual de usuario Pagina 117

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 138
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 116
Using the Quick-Start Local Boot Procedure
117341-B Rev. 00
C-3
Bay Networks recommends that you fill out the worksheets as follows:
1.
Fill out the Global Information worksheet completely.
This worksheet lists options common to all synchronous interface
configurations.
2.
After you record your protocol selections on the Global Information
worksheet, fill out
one
Router Protocol worksheet.
This worksheet lists options for RIP, OSPF, and static route configurations.
For example, if you select RIP as your routing protocol, you need only fill out
the RIP worksheet.
3.
Fill out
one
Wide Area Protocol worksheet.
This worksheet lists options for Bay Networks Proprietary PPP, Frame Relay,
Standard PPP, and SMDS configurations. For example, if you select Frame
Relay as your wide area protocol, you need only fill out the Frame Relay
worksheet.
4.
Run
install.bat
or
inst_arn.bat
as described in “Running the Quick-Start
Script” on page C-13.
Alternatively, a person at the BayStack router remote site can run the
Quick-Start script using a management console modem connection.
5.
Once the router has an initial connection to the network, see
Configuring
and Managing Routers with Site Manager
to configure the router.
Vista de pagina 116
1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 137 138

Comentarios a estos manuales

Sin comentarios