Avaya Configuring RADIUS Manual de usuario descargar pdf (Pagina 108)

Configuring RADIUS

E-6

308640-15.1 Rev 00

Configure a RADIUS Server

To configure the IP address for a RADIUS server:

Site Manager Procedure

You do this System responds

1. In the RADIUS Client Configuration

window, click on

Server

The Primary Server Address window

opens.

2. Set the following parameters:

• Server IP Address

•

RADIUS Password

Note:

You must set the same password on

the ACE/Server.

For more information, click on

Help

or see

the parameter descriptions beginning on

page A-3

The first server you configure is the

primary server

. You can have only one

primary server for each client.

3. Change the

Response Timeout

parameter to 10 seconds. By default, the

RADIUS client waits 3 seconds for a

server to respond to an authentication

request. The ACE/Server, however,

requires additional time to respond to

authentication requests. Therefore, you

must increase the response time value to

a minimum of 10 seconds. If your network

accommodates a high level of traffic, you

may need to increase the response time

value to 30 seconds.

4. Click on

. You return to the RADIUS Server

Configuration window, which shows the

parameter defaults for the server.

5. Click on

Done

. You return to the RADIUS Client

Configuration window.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 114 115 116

Comentarios a estos manuales

Sin comentarios

Avaya Configuring RADIUS Manual de usuario Pagina 108

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya Configuring RADIUS