Avaya Configuring APPN Services Manual de usuario descargar pdf (Pagina 74)

Configuring APPN Services

3-14

308963-14.00 Rev 00

Parameter: Default Backup DLUS Name

Default: None

Options: Any valid name with up to 17 characters in the format

<NETID>

<NAME>

;

NETID

is the unique network name with up to 8

characters followed by a period, and

NAME

is the control point name with

up to 8 characters

Function: Specifies the fully qualified default backup name of the DLUS node that

serves PU2.0 adjacencies configured on this node. APPN uses the default

backup name when the DLUR Support Enable/Disable parameter is set to

Enable, and when the DLUR Implicit LS Support parameter is set to

Enable for implicit link stations on the port.

Instructions: If the DLUR Support Enable/Disable parameter is set to Enable, type up

to 8 characters for the network ID name; follow with a period, and then

type a control point name with up to 8 characters. You must use uppercase

characters only and the first character must be non-numeric. Blank spaces

(leading, trailing, and embedded) are not allowed in the node name. For

example, APPNNODE.DLUR is a valid entry for this parameter.

MIB Object ID: 1.3.6.1.4.1.18.3.5.14.1.1.55

Parameter: DLUR-DLUS RSCV Storage

Default: Enable

Options: Enable

Disable

Function: Enables or disables the storage of route selection control vectors (RSCVs)

during DLUR/DLUS sessions. This parameter is useful for network

monitoring and debugging. When enabled, it will consume additional

memory for each DLUR/DLUS session. It is not used if the DLUR

Support Enable/Disable parameter is set to Disable.

Instructions: Click on Values and select Enable to enable DLUR-DLUS RSCV storage.

Select Disable to disable DLUR-DLUS RSCV storage.

MIB Object ID: 1.3.6.1.4.1.18.3.5.14.1.1.44

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 149 150

Sin comentarios

Avaya Configuring APPN Services Manual de usuario Pagina 74