Avaya Configuring APPN Services Manual de usuario descargar pdf (Pagina 41)

308963-14.00 Rev 00

2-1

Chapter 2

Enabling APPN Services

This chapter describes how to enable APPN services on:

• Logical Link Control 2 (LLC2) media, including Ethernet, token ring, and

frame relay

• LLC2 media using Source Routing Bridge (SRB) encapsulation formats over

Ethernet, FDDI, SMDS, frame relay, and Point-to-Point Protocol(PPP)

• Synchronous Data Link Control (SDLC) links in point-to-point and

multipoint networks

This chapter assumes that you have read Configuring and Managing Routers with

Site Manager and that you have:

1. Opened a configuration file

2. Specified router hardware if this a local mode configuration file

3. Selected the connector on which you are enabling APPN

Using the Parameter Descriptions

Each APPN parameter description provides information about default settings,

valid parameter options, the parameter function, instructions for setting the

parameter, and the Management Information Base (MIB) object ID.

The Technician Interface allows you to modify parameters by issuing

set

and

commit

commands with the MIB object ID. This process is equivalent to

modifying parameters using Site Manager. For more information about using the

Technician Interface to access the MIB, refer to Using Technician Interface

Software.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 149 150

Sin comentarios

Avaya Configuring APPN Services Manual de usuario Pagina 41