Avaya Configuring APPN Services Manual de usuario descargar pdf (Pagina 52)

Configuring APPN Services

2-12

308963-14.00 Rev 00

Parameter: Virtual Ring Number (hex)

Default: None

Range: 1 to 4095

Function: Specifies the unique SRB ring number to be used by APPN. It must be

unique in the SRB network. This means that the Virtual Ring Number

must be different not only from the ring IDs specified in the SRB

configuration, but different also from other Nortel Networks routers

running APPN on LLC2/SRB media.

Instructions: Specify the unique LLC ring number in the range 1 to 4095.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.6.2.25

Click on OK.

If this is the first interface for which you are configuring APPN, the APPN

Local Node Name Configuration window appears (Figure 2-2

). If this is not

the first interface for which you are configuring APPN, the APPN

Configuration window for your specific network appears. Refer to these

figures and the steps that follow them to complete the APPN configuration.

Enabling APPN Interfaces over SDLC

To configure APPN on synchronous interfaces (COM1, COM2, etc.) using the

SDLC protocol:

Select SDLC from the WAN protocols window.

The Configuration Manager displays the SDLC Line Parameters window

(Figure 2-9

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 149 150

Sin comentarios

Avaya Configuring APPN Services Manual de usuario Pagina 52