Avaya Configuring APPN Services Manual de usuario Pagina 51

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 154
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 50
Enabling APPN Services
114049 Rev. A 2-7
8.
Click on OK to configure APPN adjacent link station parameters now.
For information on configuring addjacent link stations, go to the section in
Chapter 3 entitled “Editing APPN Adjacent Link Stations.
9. Click on Cancel.
Go to Chapter 3 for information about configuring APPN.
Enabling APPN over LLC2 Interfaces Using SRB
If you are configuring LLC2 interfaces such as Ethernet, FDDI, SMDS, Frame
Relay, and PPP, you can use SRB encapsulation formats. For Ethernet (Bay
Networks proprietary SRB over Ethernet) and Frame Relay (RFC1490 Bridging
Standard), start at the Source Route Encapsulation dialog box (Figure
2-5) and
proceed as follows:
Figure 2-5. Source Route Encapsulation Dialog Box
1.
Click on OK.
The Source Routing Global Parameters window appears (Figure
2-6).
Vista de pagina 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 153 154

Comentarios a estos manuales

Sin comentarios