
Editing APPN Parameters
114049 Rev. A 3-43
Adding Adjacent Link Stations
To add an adjacent link station to an APPN interface, display the APPN Adjacent
Link Station List window (refer to Figure
3-8) and then
1. Click on Add.
The APPN Adjacent Link Station Port Configuration window appears
(Figure
3-9).
Figure 3-9. APPN Adjacent Link Station Port Configuration Window
2.
Specify the Port Name parameter, as follows:
Parameter: Port Name
Default: None
Options: Up to 8 alphanumeric uppercase characters
Function: Specifies the name of the port supporting the adjacent link station.
Instructions: Enter up to 8 alphanumeric uppercase characters with no blank spaces
(leading, trailing, or embedded).
MIB Object ID: 1.3.6.1.4.1.18.3.5.14.1.4.1.4
3. Click on OK.
The screen displays the APPN Adjacent Link Station Configuration window
specific to your network (Figure
3-10).
Comentarios a estos manuales