Avaya Configuring APPN Services Manual de usuario Pagina 111

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 154
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 110
Editing APPN Parameters
114049 Rev. A 3-47
Parameter: DLCI Address
Default: None
Range: Valid range changes based on the Frame Relay address length, as follows:
Address Length --
Range
2 bytes -- 16 to 1007
3 bytes -- 1024 to 64511
4 bytes -- 131072 to 8257535
Function: This number is the PVC identification number that the Frame Relay
network uses to direct data.
Instructions: Enter a decimal number within the valid range.
MIB Object ID: 1.3.6.1.4.1.18.3.5.14.1.4.1.27
Parameter: Enable DLUR Support for this LS
Default: Disable
Options: Enable
| Disable
Function: Specifies whether the adjacent link station is a PU2.0 node to be serviced
by DLUR. DLUR is an APPN component that allows dependent logical
units (LU type 0,1,2,3 and dependent LU6.2) within APPN.
Instructions: Click on Values and select Enable or Disable.
MIB Object ID: 1.3.6.1.4.1.18.3.5.14.1.4.1.28
Vista de pagina 110
1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 153 154

Comentarios a estos manuales

Sin comentarios