Avaya Business Secure Router 252 Configuration - Basics Manual de usuario descargar pdf (Pagina 75)

100

101

Chapter 4 User Notes 75

Nortel Business Secure Router 252 Configuration — Basics

The number controls the operating mode:

None (disabled)

RIP-1 only

RIP-2 only

Both RIP-1 and RIP-2

Advanced Router Configuration

The following notes are intended to help with advanced router configuration.

Setting up the router when the system has a server

1 If you are using a Full-Feature NAT configuration, first, do the following...

a In SUA/NAT / Address Mapping, add a 'Server' rule, specifying the

'Public' IP address of the server.

2 For both SUA-Only and Full-Feature NAT configurations, do the following...

a In SUA/NAT : SUA Server, add server private IP address and port

number(s) to the SUA/NAT Server table.

b In FIREWALL, add a WAN-to-LAN rule

c If the service is not in the list of available services, add it as a 'Custom

Port'.

d Add the rule, selecting the service, and entering the server IP address as

the destination IP address.

Connecting two sites to establish a virtual private network

The recommended method to do this is through a branch-to-branch IPSec tunnel.

1 In VPN / Summary, add a new tunnel by editing an unused rule. Create an

Active, Branch Office tunnel.

a Select 'Nailed Up' if the tunnel should not be closed while not in use.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 459 460

Comentarios a estos manuales

Sin comentarios

Avaya Business Secure Router 252 Configuration - Basics Manual de usuario Pagina 75

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya Business Secure Router 252 Configuration - Basics