Avaya Business Secure Router 252 Configuration - Basics Manual de usuario descargar pdf (Pagina 330)

100

101

330 Chapter 18 Remote management screens

NN47923-500

1 A filter in SMT menu 3.1 (LAN) or in menu 11.1.4 (WAN) is applied to block

a Telnet, FTP, or Web service.

2 A service is disabled in one of the remote management screens.

3 The IP address in the Secured Client IP field does not match the client IP

address. If it does not match, the Business Secure Router disconnects the

session immediately.

4 An SMT console session is running.

5 Another remote management session of the same type (web, FTP or Telnet) is

running. You can only have one remote management session of the same type

running at one time.

6 A web remote management session is running with a Telnet session. A web

session is disconnected if you begin a Telnet session; nor does it begin if a

Telnet session is already running.

7 A firewall rule blocks access to device.

Remote management and NAT

When NAT is enabled:

• Use the Business Secure Router WAN IP address when configuring from the

WAN.

• Use the Business Secure Router LAN IP address when configuring from the

LAN.

System timeout

There is a system timeout of 5 minutes (300 seconds) for either the console port or

Telnet, web, or FTP connections. Your Business Secure Router automatically logs

you off if you do nothing in this timeout period, except when it is continuously

updating the status in menu 24.1 or when sys stdio was changed on the

command line. Use the System screen to change the timeout period in the

Administrator Inactivity Timer field.

1 2 ... 325 326 327 328 329 330 331 332 333 334 335 ... 459 460

Comentarios a estos manuales

Sin comentarios

Avaya Business Secure Router 252 Configuration - Basics Manual de usuario Pagina 330

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya Business Secure Router 252 Configuration - Basics