Avaya Remote Access BCM Rls 6.0 Manual de usuario Pagina 5

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 28
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 4
Remote Access
NN40011-032 Issue 1.2 BCM Rls 6.0 5
Remote Access
Overview
BCM Administration and Diagnostics can be performed from a remote location
via a dial-up connection. This would prove useful in situations where limited
configuration is required, and therefore not necessary to send an engineer to
the customer site.
This guide describes how to prepare the BCM for remote access via ISDN or
Modem.
Notes:
ISDN DASS2 and DPNSS will not support dial-up/RAS connections.
The remote configuration PC should be configured with a dial-up
networking connection. The telephone number and required User
ID’s/Passwords should be entered in this configuration.
Required Information
Before commencing Remote Access, it would be useful to obtain the following
information:
The telephone/line number used to dial the BCM. Only the BCM line
number is required for BCM configuration. The remote end requires the
telephone number.
The User ID & Password required by the remote PC to make the
connection or the creation of a user account for this purpose. See the
Creating a User Account section of this guide.
The IP Addresses to be used at the Local and Remote ends.
Vista de pagina 4
1 2 3 4 5 6 7 8 9 10 ... 27 28

Comentarios a estos manuales

Sin comentarios