Avaya Remote Access BCM Rls 6.0 Manual de usuario descargar pdf (Pagina 19)

Remote Access

NN40011-032 Issue 1.2 BCM Rls 6.0 19

Attribute

Description

Default: 10.10.14.1

Remote IP Address Specification

Use IP address

to remote

If selected, the BCM will assign the IP address specified in the "IP

Address" field of this section to the remote end of the connection.

Default: selected

IP Address

When the "Use IP address pool" is enabled BCM will assign to the

remote end of the connection the IP address specified in this field.

Default: 10.10.14.2

ISDN Dial-In Parameters

The ISDN Dial-In Parameters controls Dial-in to the BCM for remote access.

This panel is used to configure the ISDN for Dial-in. It also displays the

connection status of the ISDN connections if any are in progress. The tab and

description of the fields are below.

1. To view or change the current ISDN Dial-In Parameters configuration,

in Element Manager select the Configuration tab, open the

Resources folder, click on the Dial UP Interfaces link, followed by the

ISDN Dial-In Parameters tab.

Attribute

Description

Enable ISDN

Dial-In

Enable or disable modem dial-in.

Default: disabled

Connection

State

This is a table that shows the current dial-in state if connected.

User

Displays the user that is currently dialled in.

Local IP Address

The local IP address assigned to the dial-in connection.

Remote IP

Address

The remote IP address of the dial-in connection.

Callback

This shows if callback is enabled for this dial-in connection.

Status

The status of the dial-in connection.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Comentarios a estos manuales

Sin comentarios

Avaya Remote Access BCM Rls 6.0 Manual de usuario Pagina 19

Comentarios a estos manuales

Relacionado con productos y manuales para Dispositivos de redes celulares Avaya Remote Access BCM Rls 6.0