Avaya Remote Access BCM Rls 6.0 Manual de usuario descargar pdf (Pagina 17)

Remote Access

NN40011-032 Issue 1.2 BCM Rls 6.0 17

Modem Compatibility

The internal modem is compatible with all V.34 modems, and has been tested

with the following modems:

• U.S. Robotics Sportster 33.6 FaxModem (external modem)

• Microcom DeskPorte 28.8P (external modem)

• PCTEL 2304WT V.92 MDC (internal modem Dell Portable)

• U.S. Robotics Sportster 56K (external modem)

Modem Dial-In Parameters

The Modem Dial-In parameters controls Dial-in to the BCM for remote access.

This panel is used to configure the modem for Dial-in. It also displays the

connection status of the modem if one is in progress.

1. To view or change the current Modem Dial-In Parameters

configuration, in Element Manager select the Configuration tab, open

the Resources folder, click on the Dial UP Interfaces link, followed by

the Modem Dial-In Parameters tab.

Attribute

Description

Enable Modem

Dial-In

Enable or disable modem dial-in.

Default: disabled

Connection

State:

This is a table that shows the current dial in state if connected. Note:

There is a maximum of one entry in this table (as there is only one

modem). This table will be blank if no dial in connection is currently

active.

User

Displays the user that is currently dialled in.

Local IP Address

The local IP address assigned to the dial-in connection.

Remote IP

Address

The remote IP address of the dial-in connection.

Callback

This shows if callback is enabled for this dial-in connection.

Status

The status of the dial-in connection.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Sin comentarios

Avaya Remote Access BCM Rls 6.0 Manual de usuario Pagina 17