Avaya Configuring Data Compression Services Manual de usuario descargar pdf (Pagina 70)

Configuring Data Compression Services

A-10

117352-C Rev. 00

Parameter: Engine Type

Path: Configuration Manager > Protocols > Hi/fn LZS > Interfaces

Default: Software

Options: Software

Hardware

Function: Specifies whether data will be compressed by software or hardware.

Instructions: For hardware compression, set this parameter to Hardware.

For software compression, set this parameter to Software.

MIB Object ID: 1.3.6.1.4.1.18.3.4.22.5.1.4

Parameter: Fallback Compression Mode

Path: Configuration Manager > Protocols > Hi/fn LZS > Interfaces

Default: Software CPC

Options: Software CPC

None

Function: When a circuit on this line cannot register for hardware compression due to a

lack of hardware-context memory, this parameter determines whether data will

be compressed by software or remain uncompressed.

Instructions: If you want data to be compressed by software on a circuit that cannot register

for hardware compression, set this parameter to Software CPC.

If you want data to remain uncompressed on a circuit that cannot register for

hardware compression, set this parameter to None. None is a good choice for

very high-speed links.

MIB Object ID: 1.3.6.1.4.1.18.3.4.22.5.1.8

1 2 ... 65 66 67 68 69 70 71 72 73 74

Sin comentarios

Avaya Configuring Data Compression Services Manual de usuario Pagina 70