Avaya Configuring RADIUS Manual de usuario descargar pdf (Pagina 67)

Configuration Examples

303538-A Rev 00

C-3

Enable RADIUS Authentication

To enable RADIUS authentication, begin at the Configuration Manager window:

Select Protocols > Global Protocols > RADIUS > Create RADIUS.

Site Manager displays the RADIUS Client Configuration window, which lists

the slots available for configuring RADIUS.

To configure a slot for RADIUS, click on the box labeled None.

Site Manager displays a menu showing the RADIUS options.

Select Authentication for the slot.

Click on the slot’s COM connectors that you want to enable for RADIUS.

These connectors are automatically enabled for RADIUS operation.

Once a connector is enabled for RADIUS, Site Manager adds the letters

to the connector’s name to designate it as a RADIUS interface.

Enter 192.32.24.6 for the Client IP Address parameter.

Click on Server at the bottom of the window.

Site Manager displays the Primary Server Address window.

Enter 192.32.24.7 for the Server IP Address parameter.

Enter Client_BLN for the RADIUS Password parameter, then click on

OK.

Site Manager displays the RADIUS Server Configuration window, which

shows the default configuration for the server.

Accept the defaults for the server configuration parameters.

10.

Click on Done.

You return to the RADIUS Client Configuration window.

11.

Go to the next section, “Select IP.”

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 77 78

Sin comentarios

Avaya Configuring RADIUS Manual de usuario Pagina 67