Avaya Configuring RADIUS Manual de usuario descargar pdf (Pagina 66)

Configuring RADIUS

C-2

303538-A Rev 00

Configuring RADIUS Authentication

This example explains how to configure the router as a RADIUS authentication

client, and assumes the following:

• The client is a BLN.

• The network connections are all Raise DTR modem connections.

• The WAN serial interface type is synchronous.

• IP and RIP are the protocols for the client’s unnumbered circuit interface.

• Dial optimized routing and one-way authentication are configured on the

remote routers.

• A default route of 0.0.0.0 is configured on the remote routers to contact the

client.

Figure C-1

shows the sample network for this example.

Figure C-1. Sample Network Using RADIUS Authentication

Before You Begin

Before you begin, do the following:

Create and save a configuration file with at least one PPP interface.

Retrieve the configuration file in local, remote, or dynamic mode.

Specify the router hardware if this is a local-mode configuration.

RADIUS server

RADIUS client

POTS

Remote

user B

Remote

user A

CR0002A

MODEM

IP address: 192.32.24.7

IP address:192.32.24.6

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 77 78

Sin comentarios

Avaya Configuring RADIUS Manual de usuario Pagina 66