Avaya Configuring RADIUS Manual de usuario descargar pdf (Pagina 49)

Customizing the RADIUS Server Configuration

303538-A Rev 00

4-3

Modifying the Server Mode

The server mode tells the client how the server is configured. You may want to

change the service from RADIUS authentication to accounting or from

accounting to authentication. You may also want to use both services.

To modify the server mode, begin at the Configuration Manager window:

Select Protocols > Global Protocols > RADIUS > Edit Server.

Site Manager displays the RADIUS Server Configuration window (refer to

Figure 4-2).

Enter a value for the Server Mode parameter, then click on Apply.

Click on Done to return to the Configuration Manager window.

Authentication and Accounting UDP Ports

The User Datagram Protocol (UDP) port is the logical port that designates data for

the RADIUS application on the server. The UDP port is typically included in an

IP datagram.

The default values for the authentication and accounting UDP ports follow the

RADIUS RFC specifications. In general, you should not change these values.

Refer to Appendix A

for parameter descriptions.

Site Manager: Server Mode parameter: page A-2

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 77 78

Sin comentarios

Avaya Configuring RADIUS Manual de usuario Pagina 49