
Site Manager Multicast Parameters
114064 Rev. A A-15
IGMP Entry Interface Parameters
Parameter: Static Group Address
Path: Configuration Manager > Protocols > IP > Multicast > IGMP > Global
Default: None
Options: A multicast address
Function: Specifies the multicast address for the group of which the host is a member.
Instructions: Use the Static Group Address parameter -- along with the Static Group CCT
and Static Group Prefix parameters -- to statically register the network on
which the multicast group member resides.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.13.4.1..3
Parameter: Static Group Prefix
Path: Configuration Manager > Protocols > IP > Multicast > IGMP > Global
Default: None
Options: An address prefix
Function: Specifies the prefix of the multicast group address.
Instructions: Use the Static Group Prefix parameter -- along with the Static Group CCT and
Static Group Address parameters -- to statically register the network on which
the multicast group member resides.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.13.4.1..4
Parameter: Enable
Path: Configuration Manager > Protocols > IP > Multicast > IGMP > Entry
Default: Enable
Options: Enable
| Disable
Function: Indicates whether this IGMP interface record is enabled or disabled.
Instructions: If you have configured IGMP on this interface, use this parameter to disable it.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.13.2.1.2
Comentarios a estos manuales