Avaya Configuring IP Multicasting Services Manual de usuario Pagina 49

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 103
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 48
Customizing DVMRP
114064 Rev. A 4-11
Specifying a Probe Interval
The probe interval determines how often DVMRP sends a probe on interfaces
from which no neighbors have been heard.
By default, DVMRP sends a probe every 10 seconds. You can use Site Manager to
specify a value from 5 to 30 seconds.
If your neighbor is running DVMRP mrouted, ensure that your probe interval
value matches the value used by the neighbor.
Specifying a Route Switch Interval
The route switch interval specifies how long to wait, without receiving a
subsequent route update from the original neighbor, before switching to a
different neighbor advertising equal cost for this route.
By default, DVMRP waits 140 seconds. You can use Site Manager to specify a
value from 20 to 2000 seconds.
If your neighbor is running DVMRP mrouted, the recommended value is 140
seconds.
Site Manager: Neighbor Timeout parameter: page A-2
Site Manager: Route Switch Timeout parameter: page A-5
Vista de pagina 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 102 103

Comentarios a estos manuales

Sin comentarios