Avaya Quick2Config Manual de usuario descargar pdf (Pagina 44)

44 Chapter 3 Installing Quick2Config on UNIX systems

207809-B

Set the display environment variable.

• If you are running the UNIX shell (sh) or the Korn shell (ksh), type the

following commands:

DISPLAY=localsystem:0.0

export DISPLAY

where

localsystem:0.0

is the local display.

• If you are running the C shell (csh), type the following commands:

setenv DISPLAY=localsystem:0.0

export DISPLAY

where

localsystem:0.0

is the local display.

Navigate to the location of the Quick2Config program files by typing the

following command:

cd /usr/Quick2Config/server/bin

Type the following command:

./server.sh

The Optivity Quick2Config Server window opens. This window displays

information about the Quick2Config services and device drivers as they are

loaded and started. The message “Optivity Quick2Config Server Ready”

indicates that Quick2Config has been installed correctly and that clients can

connect to the server. (See Figure 9 on page 43.)

Starting the standalone client software

Although you can start a client session from a Web browser, for purposes of

verifying the installation use the following procedure to start the standalone client:

Open a command window.

Navigate to the location of the Quick2Config program files by typing the

following command:

cd /usr/Quick2Config/client/bin

Type the following command:

/client.sh

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 97 98

Sin comentarios

Avaya Quick2Config Manual de usuario Pagina 44