Avaya R5.0: Guía de configuración descargar pdf (Pagina 11)

BCM Rls 5.0 Configuration Guide For: MTS/Allstream SIP Trunking

2009-00002508 Page 11 of 20

10. Click on the Destination Codes tab.

11. Configure a destination code to route dialed digits by clicking on the Add button. Digits that begin with

this destination code will be presented to the SIP trunking component on the BCM for routing towards the

Service Provider.

12. In the Add Destination Code dialog box, enter a numeric number for the destination code and click on

the OK button.

13. Select the row representing the Destination Code entered in the previous step

14. Under Normal Route column, double click and enter the route entered in Step 4.

15. Under the Absorbed Length column, specify the number of digits that will be absorbed before sending

the rest of the digits to the service provider.

5.1.3 SIP Routing Table Configuration

There are two possible ways to configure the BCM to route outbound SIP calls to the Service Provider:

• Using the Routing Table tab found by clicking on IP Trunks module in Configuration

Resources

Telephony Resources.

• Using the SIP Proxy tab found by clicking on IP Trunks module in Configuration

Resources

Telephony Resources.

This guide illustrates how to do it using the Routing table. For details of how to use the SIP Proxy tab, see the

BCM configuration guides.

1. Under Configuration

Resources

Telephony Resources; select module type “IP Trunks” and

click on the “Routing Table” tab.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Sin comentarios

Avaya R5.0: Guía de configuración Pagina 11