Avaya Configuring XNS Services Manual de usuario descargar pdf (Pagina 62)

Configuring XNS Services

4-26

308651-14.00 Rev 00

Click on Apply to save your changes.

Click on Done to exit the XNS Static Routes window.

A description of parameters in the XNS Static Routes window follows.

Parameter: Enable

Path: Configuration Manager > Protocols > XNS > Static Routes

Default: The Configuration Manager automatically sets this parameter to Enable

when you click on Add in the XNS Static Routes window.

Options: Enable

Disable

Function: Specifies the state (active or inactive) of the static route record in the XNS

routing tables.

Instructions: Select Disable to make the static route record inactive in the XNS routing

table; the router will not consider this static route.

Select Enable to make the static route record active in the XNS routing

table.

MIB Object ID: 1.3.6.1.4.1.18.3.5.10.6.1.2

Parameter: Cost

Path: Configuration Manager > Protocols > XNS > Static Routes

Default: 0 router hops

Options: 0 to 15 router hops

Function: Specifies the number of router hops added to an XNS data packet. The

router uses this parameter when determining the best route for a datagram

to follow. The cost is also propagated through RIP. The default setting of 0

for static routes gives them priority over RIP-learned routes.

Instructions: Enter the number of router hops.

MIB Object ID: 1.3.6.1.4.1.18.3.5.10.6.1.4

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 71 72

Sin comentarios

Avaya Configuring XNS Services Manual de usuario Pagina 62