Avaya Configuring XNS Services Manual de usuario descargar pdf (Pagina 44)

Configuring XNS Services

4-8

308651-14.00 Rev 00

Parameter: Cost

Path: Configuration Manager > Protocols > XNS > Interfaces

Default: 0 (for each hop)

Options: 1 to 15

Function: Sets the cost (number of hops) for this interface. This parameter allows

you to configure the shortest path. The cost is added to routes learned on

this interface through RIP and is specified in subsequent RIP packets sent

to other interfaces. XNS disposes of the packet when its hop count

surpasses 15.

Instructions: Enter the interface cost value. Standard RIP implementation assigns a cost

of 1. Increasing this value causes the RIP Network Diameter to reach the

upper bound of 15 more quickly.

MIB Object ID: 1.3.6.1.4.1.18.3.5.10.3.1.7

Parameter: Xsum On

Path: Configuration Manager > Protocols > XNS > Interfaces

Default: Enable

Options: Enable

Disable

Function: Performs checksumming and compares the checksum to the number in

the Checksum field of each XNS packet. However, XNS does not perform

a checksum on a packet it receives if the value 0xffff is in the Checksum

field. If XNS performs a checksum on a packet, and its value does not

match the value in the Checksum field, XNS drops the packet.

Instructions: Select Enable if you want XNS to perform checksumming.

Select Disable to bypass checksumming.

MIB Object ID: 1.3.6.1.4.1.18.3.5.10.3.1.8

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 71 72

Sin comentarios

Avaya Configuring XNS Services Manual de usuario Pagina 44