Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario descargar pdf (Pagina 237)

100

101

Customizing OSPF Services

308627-14.00 Rev 00

6-59

For example, the following command sets the state to disabled for OSPF accept

policy pol_1:

accept/pol_1/ospf# state disabled

accept/pol_1/ospf#

Table 6-10. BCC Definition Parameters for OSPF Accept Policies

Parameter Values Function

state enabled (default)

disabled

Enables and disables the policy you created

action ignore (default)

Specifies whether the protocol ignores a route

that matches the policy or forwards the route to

the routing table manager

preference 1 (default) to 16 Assigns a metric value (the higher the number,

the greater the preference) to a route that the

protocol forwards to the routing table manager.

If confronted with multiple routes to the same

destination, the routing table manager may

need to use this value to decide which route to

insert. Routes for all networks (0.0.0.0/0.0.0.0)

should have the lowest preference, and routes

for the most specific networks (longest address

and mask) should have the highest preference.

precedence 0 (default) to any

integer

Assigns a metric value to this policy (a policy

with a higher value takes precedence over a

policy with a lower value). This value

determines the order of precedence for policies

that match the same route.

1 2 ... 232 233 234 235 236 237 238 239 240 241 242 ... 373 374

Comentarios a estos manuales

Sin comentarios

Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 237

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya Configuring IP, ARP, RIP, and OSPF Services