Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario descargar pdf (Pagina 161)

100

101

Customizing RIP Services

308627-14.00 Rev 00

5-23

Deleting RIP from an Interface

To delete RIP from an interface on which it is currently configured, proceed as

follows.

Using the BCC

To delete RIP from an interface, navigate to a RIP interface prompt (for example,

box; eth 2/2; ip/2.2.2.2/255.255.0.0; rip

) and enter:

delete

For example, the following command deletes RIP from interface 2.2.2.2:

rip/2.2.2.2#

delete

ip/2.2.2.2/255.255.255.0#

Using Site Manager

To delete RIP from an interface, complete the following tasks:

4. Click on the RIP interface that you want to

edit.

The parameter values for that interface

appear in the IP RIP Interface

Configuration window.

5. Set the

Initial

Stabilization Timer

parameter. Click on

Help

or see the

parameter description on page A-70.

6. Click on

Apply

, and then click on

Done

. You return to the Configuration Manager

window.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on the connector from which you

want to delete RIP services.

The Edit Connector window opens.

2. Click on

Edit Circuit

. The Circuit Definition window opens.

3. Choose

Protocols

. The Protocols menu opens.

(continued)

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 373 374

Comentarios a estos manuales

Sin comentarios

Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 161

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya Configuring IP, ARP, RIP, and OSPF Services