
Site Manager Parameters
117376-A Rev. A A-13
Parameter: DLCI Number
Path:
Configuration Manager (select a connector) > Edit Connector window > Edit
Circuit > Services > Frame Relay Service List window > Add
Default: None
Options: The frame relay switch provider assigns DLCI numbers. These assigned
numbers are valid options.
Valid DLCI numbers vary based on the frame relay address length. The DLCI
numbers that the switch provider assigns are generally in the following ranges:
2 byte -- 16 to 1007
3 byte -- 1024 to 6451
4 byte -- 131072 to 8257535
Function: Specifies the PVC identification number that the frame relay network uses to
direct data. If you are running IP over frame relay, the router uses this number as
the MAC address for an adjacent host. See Configuring IP Services for more
information about adjacent hosts.
Instructions: Enter the decimal number that the frame relay provider assigns.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.9.2.1.4
Comentarios a estos manuales