Avaya Configuring Frame Relay Services Manual de usuario Pagina 60

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 94
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 59
Configuring Frame Relay Services
3-14 117376-A Rev. A
When you enable congestion control, you can set the length of time during which
the router counts congestion notifications. You can also set the maximum number
of congestion notifications that the router can receive during this time period. If
the router receives this number of congestion notifications within the time period
you specify, it stops transmitting data. The router resumes transmission when it
stops receiving congestion notifications.
If you enable congestion control, all PVCs on the interface use congestion control
and the values you specify for the congestion timer and congestion counter, unless
you configure PVCs individually and either disable this feature or select other
values for the congestion control parameters. To enable congestion control,
complete the tasks in the following table.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
click on a port configured for frame relay.
The Edit Connector window opens.
2. Click on Edit Circuit. The Frame Relay Circuit Definition
window opens.
3. Click on Interfaces. The Frame Relay Interfaces window
opens.
4. Set the following parameters, using Help
or the parameter descriptions that begin
on page A-
7:
Congestion Control
Congestion Timer
Congestion Counter
Congestion Method (applies only
when you enable traffic shaping)
5. Edit other parameters if you want, and
click on Apply.
6. Click on Done. You return to the main Configuration
Manager window.
7. In the Configuration Manager window,
click on a port configured for frame relay.
The Edit Connector window opens.
8. Click on Edit Circuit. The Frame Relay Circuit Definition
window opens.
9. Click on Services. The Frame Relay Service List window
opens.
(continued)
Vista de pagina 59
1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 93 94

Comentarios a estos manuales

Sin comentarios