Avaya Configuring DLSw Services Manual de usuario Pagina 89

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 256
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 88
Starting DLSw
114063 Rev. A 4-3
SDLC SDLC Line Parameters
DLSw Global Parameters
DLSw Slot Configuration/Add
Local Device
Configuration/Add
DLSw Peer Configuration
DLSw SAP Configuration
All parameters required; Clock Source,
Internal Clock Speed, Sync Line Coding,
Cable Type, RTS Enable
IP Virtual Ring
For dual-switch only: Slot, IP Address
All parameters required
For dual-switch only; Peer IP Address
Default values usually acceptable
Frame Relay
(Routed SNA)
DLSw Global Parameters
Use Source Route
Encapsulation?
Source Routing Global
Parameters
Edit SR Interface
LLC2 Frame Relay Mapping
Add
DLSw Slot Configuration/Add
DLSw Peer Configuration
DLSw SAP Configuration
IP Virtual Ring
OK or CANCEL. If CANCEL, go to the LLC2
Frame Relay Mapping/Add window. If OK,
go to the Source Routing Global
Parameters
SR Bridge ID, SR Bridge Group LAN ID,
SR Bridge Internal LAN ID
Source Routing Ring Number
DLCI, Remote MAC, Local MAC
For dual-switch only: Slot, IP Address
For dual-switch only; Peer IP Address
Default values usually acceptable
Table 4-1. DLSw Startup Screens and Required Parameters
(continued)
Network
Interface
Site Manager Screen Required Parameters/Options
Vista de pagina 88
1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 255 256

Comentarios a estos manuales

Sin comentarios