
Editing DLSw Parameters
114063 Rev. A 5-51
Parameter: PU Type
Default: None
Options: T2.0
| T2.1
Function: Specifies the type of the XID-sending node. This parameter is used with
the IDBLOCK, IDNUM, and XID Format parameters to determine the
station exchange identification (XID) value.
Instructions: Choose either T2.0 or T2.1.
MIB Object ID: N/A
Parameter: IDBLOCK
Default: None
Options: Any 3-digit hexadecimal value
Function: Specifies the block number, which must match the host’s IDBLOCK
parameter value that identifies incoming connection requests. This
parameter is used with the PU Type, IDNUM, and XID Format
parameters to determine the station exchange identification (XID) value.
Table 5-2 lists the IDBLOCK numbers.
Instructions: Obtain the configured value at the host (from VTAM or other host
operating system) for this device.
MIB Object ID: N/A
Table 5-2. IDBLOCK Numbers for Switched PUs
Device IDBLOCK Number
NPSI 003
3770 004
3650/3680 005
6100/3790 006
NTO, 3767 007
S/34 00E
3774 011
(continued)
Comentarios a estos manuales