Avaya Configuring DLSw Services Manual de usuario Pagina 172

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 256
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 171
Configuring DLSw Services
5-54 114063 Rev. A
Parameter: Source (Virtual) SAP (hex)
Default: 0x4
Range: 0x01 to 0xFE
Function: Specifies the source service access point (SAP) of an emulated Token
Ring or Ethernet endstation for this device.
Instructions: Begin the address with 0x and type a 1-digit or 2-digit hexadecimal
source SAP address associated with this device. Typical values are
multiples of 4.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.12.1.7
Parameter: Destination (Host) MAC (hex)
Default: None
Options: Any standard MSB Token Ring MAC address
Function: Identifies (with the Destination SAP) the Token Ring or Ethernet host that
the local device will reach via SDLC services.
Instructions: Consult your host system manager for the host MAC address; then type
the 12-digit hexadecimal address.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.12.1.8
Parameter: Destination (Host) SAP (hex)
Default: 0x4
Range: 0x01 to 0xFE
Function: Identifies (with the Destination MAC) the Token Ring or Ethernet host
that the local device will reach via SDLC services.
Instructions: Consult your host system manager for the host SAP address. Type 0x
followed by a 1-digit or 2-digit hexadecimal address.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.12.1.9
Vista de pagina 171
1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 255 256

Comentarios a estos manuales

Sin comentarios