Avaya BCM Imaging Tool Guía de usuario descargar pdf (Pagina 31)

Returning the Business Communications Manager to normal operation 31

BCM Imaging Tool User Guide

Removing a USB CD-ROM drive from a BCM 200 or BCM 400

1 Turn off the CD-ROM drive.

2 Disconnect the power cable from the CD-ROM drive.

3 Disconnect the USB cable from the CD-ROM drive and the Business Communications

Manager.

Removing an IDE CD-ROM drive from a BCM 200 or BCM 400

1 Disconnect the power cable from the BCM 200 or BCM 400.

2 Attach one end of a grounding strap to your wrist and the other end to a grounded metal

surface.

3 Disconnect the IDE ribbon cable from the CD-ROM drive.

4 Disconnect the power connector from the CD-ROM drive.

5 Remove the CD-ROM drive from the BCM 200 or BCM 400.

6 Set the top cover on the BCM 200 or BCM 400.

7 With the rear of top cover slightly raised, slide the top cover forward until the cover engages

with the BCM 200 or BCM 400.

8 Press the top cover down until it rests on the BCM 200 or BCM 400.

9 Install the two top cover screws at the rear of the platform base chassis.

Removing an IDE CD-ROM drive from a BCM 1000

1 Disconnect the power cable from the BCM 1000.

2 Attach one end of a grounding strap to your wrist and the other end to a grounded metal

surface.

3 Disconnect the IDE ribbon cable from the CD-ROM drive.

4 Disconnect the power connector from the CD-ROM drive.

5 Remove the CD-ROM drive from the BCM 1000.

6 Set the top cover on the BCM 1000.

7 With the rear of top cover slightly raised, slide the top cover forward until the cover engages

with the BCM 1000.

8 Press the top cover down until it rests on the BCM 1000.

9 Install the two top cover screws at the rear of the platform base chassis.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 41 42

Sin comentarios

Avaya BCM Imaging Tool Guía de usuario Pagina 31