
12 Overview
NN40010-314 01.02
Prerequisites
To use the BCM Imaging Tool, you must be at the same site as the Business Communications
Manager system. You also need the following:
• a BCM Imaging Tool CD
This CD contains the BCM Imaging Tool application and the system files required by the
Business Communications Manager system to boot from this CD.
• a set of BCM Image CDs
This set of CDs contains the files that are being loaded onto the Business Communications
Manager system. There is one set of BCM Image CDs for each version of Business
Communications Manager software that you can load. Make sure you have the correct set of
CDs for the Business Communications Manager software version you want to load (for
example, BCM 3.6).
• an access code for the Business Communications Manager system you are working on
• a keyboard
• a monitor
• a USB or IDE CD-ROM drive
• access to a network drive (optional)
Compatible USB CD-ROM drives
The BCM Imaging Tool works with USB CD-ROM drives that support the El Torito Bootable
CD-ROM Format Specification. The following USB CD-ROM drives have been tested by Nortel
Networks and are known to be compatible with the BCM Imaging Tool.
• PlexWriter™ 24/10/24U Hi-Speed USB external CD-RW drive
• LG Portable USB 2.0 CD-RW/DVD-ROM Drive
• Iomega CD-RW 52x24x52x USB 2.0 Drive
• Universal BUSlink USB 2.0 SLIM 24X CD-ROM PC
• Addronics 52x32x32x
Other USB CD-ROM drives may be compatible, but they have not been tested by Nortel Networks
for compatibility.
Note: The BCM Imaging Tool does not work on Business Communications Manager
systems with an 8 GB hard drive.
Note: To use a USB CD-ROM drive, your Business Communications Manager system
must be a BCM 200 or BCM 400. As well, your system have been purchased with
software version 3.5 or greater, or upgraded to software version 3.5 or greater using the
Business Communications Manager Upgrade Kit.
Comentarios a estos manuales