
BayRS, BCC, and Site Manager Software Version 15.1.0.0 Fixed Anomalies
8
308681-15.1 Rev 00
CR Q00047410-02: OSPF
When a network outage occurs under the following conditions, a BDR of a
non-backbone OSPF area may leave type 3 LSAs or network summaries of
networks from that area max-aged in the LSDB:
• The router must be an area border router (ABR).
• The backbone network must be a broadcast network.
• Another area on the router must be on a broadcast network that is shared with
other ABR routers.
CR Q00048129: BCC_BGP
After you use the BCC to add BGP confederation-peers, the
show config-all
command does not display the confederation-peers after you exit and restart the
BCC.
CR Q00048217-01: BCC_Multiuser
From the BCC, the multilevel access user password must be set to be exactly 10
characters or the router returns an error message.
CR Q00054031-02: APPN
On a router with APPN configured, executing the
ping -appn
command without
the
-m
<
mode_name
> option causes the router to loop continuously.
CR Q00054653-02: Frame Relay
The Passport 5430 and Passport 2430 routers drop IP frames received over a frame
relay network if the frames have an SNAP header.
CR Q00060108-02: NAT
If you have a large number of NAT entries (2000 or more) in the NAT static
mapping table and enter the NAT context in BCC config mode, the router faults.
CR Q00062295-03: NAT
When you enable NAT, the router does not process RIP 1 updates with a source
address of 255.255.255.255.
Comentarios a estos manuales