Avaya BCM Networking Manual de usuario descargar pdf (Pagina 15)

Setting up Enterprise Edge Networking 15

P0908529 Issue 02 Enterprise Edge Networking Set Up and Operation Guide

Voice Format

Describes the voice encoding scheme used for messages sent to the destination site.

The voice encoding must refer to the destination site. Enterprise Edge Voice

Messaging systems with Digital Voice Cards (DVC) installed have Adaptive

Differential Pulse Code Modulation (ADPCM) as their voice encoding type.

Enterprise Edge servers that have Media Services Card (MSC) voice cards installed

use Sub Band Coding (SBC) as their voice encoding type. Destination sites running

voice messaging systems other than Enterprise Edge Voice Messaging must have

VPIM as their voice encoding type. The default setting is ADPCM.

Site Name (Second instance)

A recording of the Site Name. The name plays to the local user when addressing the

message or reviewing message envelope information. If the Site Name is not

recorded, unknown site plays. Click the Voice button and record or import the Site

Name.

Before adding sites to the Network, complete Network Site Table - Digital Sites on

page 31.

To add a site to the Network Site Table:

1. Click the Networking menu and then click Site Administration.

The Site Administration dialog box appears.

2. Click the Add button.

3. The Digital-Specific Networking Site Parameters dialog box appears.

4. In the Site Name box, type the Site Name.

5. In the Host Name box, type the Host Name.

6. In the Site Prefix box, type the Site Prefix.

7. In the Mailbox Prefix box, type the Mailbox Prefix.

8. At the Voice Format options, select ADPCM, SBC or VPIM.

9. Click the Voice button to open the dialog box from which you can import or

record a Site Name.

10. Click the OK button.

The Site Adminstration dialog box appears with the new site added.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 37 38

Sin comentarios

Avaya BCM Networking Manual de usuario Pagina 15