Avaya a Power Module in the Passport 5430 Multiservice Access Switch Manual de usuario descargar pdf (Pagina 30)

Using a flat-tip screwdriver, tighten the captive screw until the power

supply is seated firmly.

8. Connect to the AC power source.

For instructions, see “Connecting to the AC Power Source” on page 17.

9. Turn on the power supply power switch.

Removing and Installing a Power Supply Filler Panel

Nortel Networks ships the Passport 5430 with a filler panel in the power

supply slot reserved for the second power supply.

Before you can install a second power supply, you must remove the power

supply filler panel. for instructions, see the next section, “Removing a Power

Supply Filler Panel.”

If you remove a power supply from the Passport 5430 without replacing it,

you must install a power filler panel to maintain the proper cooling airflow.

For instructions, see “Installing a Power Supply Filler Panel” on page 16.

Removing a Power Supply Filler Panel

To remove a power supply filler panel:

1. Using a flat-tip screwdriver, loosen the captive screw that fastens the

power supply filler panel to the chassis until the filler panel disengages

(Figure 5).

1 2 ... 25 26 27 28 29 30 31 32 33 34

Sin comentarios

Avaya a Power Module in the Passport 5430 Multiservice Access Switch Manual de usuario Pagina 30