Avaya Connecting ASN Routers to a Network Manual de usuario descargar pdf (Pagina 80)

Connecting ASN Routers to a Network

4-8

303549-A Rev 00

What to Do Next

You can now boot the ASN over the network, assuming that you already

• Configured a UNIX workstation to support network booting, as described in

Chapter 2

• Prepared configuration and boot image files and placed them in the

appropriate locations for your boot configuration, as described in Chapter 3

Whenever you boot the ASN, it should start routing traffic according to the

configuration file it obtains from the BOOTP server.

You use the Site Manager Statistics Manager to view traffic statistics and the

Event Log to determine whether the ASN is routing traffic. Refer to Configuring

and Managing Routers with Site Manager for instructions on using the Statistics

Manager and Events Manager tools.

If the ASN does not begin routing traffic after booting, refer to Appendix A

of this

guide.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 105 106

Sin comentarios

Avaya Connecting ASN Routers to a Network Manual de usuario Pagina 80