Avaya Configuring SNMP, RMON, BOOTP, DHCP, and RARP Services Manual de usuario Pagina 136
- Pagina / 148
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Configuring SNMP, RMON, BOOTP, DHCP, and RARP Services
A-26 114070 Rev. B
RARP Interface Parameters
Use the following guidelines to configure RARP interface parameters in the
RARP Interface Table window.
RARP Address Parameters
Use the following guidelines to configure RARP address parameters in the RARP
Addresses window.
Parameter: Enable/Disable
Path: Configuration Manager > Protocols > IP > Reverse ARP > Interface Table
Default: Enable
Options: Enable | Disable
Function: Reenable or disable the RARP interface you selected from the list of interfaces.
Instructions: Select Enable to reenable a disabled interface. Select Disable to disable an
interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.9.3.1.2
Parameter: MAC Address
Path: Configuration Manager > Protocols > IP > Reverse ARP > Map Table > Add
Default: None
Options: Any valid MAC address
Function: Specifies the MAC address of a client that will use the RARP services of this
router.
Instructions: Enter the MAC address of a client.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.9.2.1.2
- Configuring SNMP 1
- RMON, BOOTP, DHCP 1
- Bay Networks Software License 3
- Contents 5
- 114070 Rev. B 10
- About This Guide 15
- Before You Begin 16
- Conventions 16
- Acronyms 17
- World Wide Web 21
- Customer Service FTP 21
- Support Source CD 22
- CompuServe 22
- How to Get Help 23
- Chapter 1 25
- Starting SNMP, RMON, BOOTP 25
- DHCP, and RARP Services 25
- Starting SNMP Services 26
- Starting RMON 27
- Enabling the Ethernet DCM 28
- Customizing the Ethernet DCM 28
- Starting BOOTP Services 29
- Starting DHCP 30
- Starting RARP Services 31
- Chapter 2 33
- SNMP, RMON, BOOTP 33
- DHCP, and RARP Concepts 33
- SNMP Messages 34
- Figure 2-1. Role of SNMP 35
- SNMP Implementation Notes 36
- Internet Protocol (IP) 37
- Events and Traps 37
- 2-6 114070 Rev. B 38
- Table 2-1. Severity Levels 38
- Thresholds 39
- Threshold Example 40
- RMON Overview 42
- SNM0011A 43
- RMON Architecture 44
- RMON MIB Groups 45
- 2-14 114070 Rev. B 46
- 114070 Rev. B 2-15 47
- 2-16 114070 Rev. B 48
- RMON Interoperability Issues 49
- RMON Applications 50
- RMON Memory Use 50
- 114070 Rev. B 2-19 51
- 2-20 114070 Rev. B 52
- 2-22 114070 Rev. B 54
- BOOTP Relay Agent Overview 56
- SNM0002A 57
- 2-26 114070 Rev. B 58
- SNM0001A 59
- 2-28 114070 Rev. B 60
- DHCP Overview 61
- 2-30 114070 Rev. B 62
- SNM0005A 63
- 2-32 114070 Rev. B 64
- SNM0006A 65
- 2-34 114070 Rev. B 66
- RARP Overview 67
- 2-36 114070 Rev. B 68
- Chapter 3 69
- Customizing SNMP 69
- Adding an SNMP Community 71
- Deleting an SNMP Community 72
- Adding a Manager 73
- 3-6 114070 Rev. B 74
- Deleting a Manager 75
- 3-8 114070 Rev. B 76
- Configuring Trap Exceptions 77
- Configuring Thresholds 78
- Adding a Threshold 79
- 3-12 114070 Rev. B 80
- Specifying Threshold Units 81
- 3-14 114070 Rev. B 82
- Chapter 4 83
- Customizing a DCM for RMON 83
- 4-2 114070 Rev. B 84
- Specifying the Boot Option 85
- Saving the Boot Image File 85
- 4-4 114070 Rev. B 86
- Rebooting the Ethernet DCM 87
- 4-8 114070 Rev. B 90
- Using Optivity LAN with RMON 92
- Chapter 5 95
- 5-2 114070 Rev. B 96
- Enable BOOTP on 98
- Corporate backbone 98
- Booting routers 98
- BOOTP server 98
- Customizing BOOTP 101
- 5-8 114070 Rev. B 102
- Deleting BOOTP Globally 104
- Chapter 6 105
- Customizing DHCP 105
- Deleting DHCP Globally 106
- Chapter 7 107
- Customizing RARP 107
- 7-2 114070 Rev. B 108
- Disabling RARP Globally 109
- Deleting RARP Globally 109
- Appendix A 111
- Parameter Descriptions 111
- SNMP Global Parameters 112
- 113
- SNMP Community Parameters 114
- SNMP Manager Parameters 115
- A-6 114070 Rev. B 116
- 119
- 122
- 122
- 114070 Rev. B A-13 123
- DCM Global Parameters 124
- 1:dcm_image 125
- 126
- 126
- BOOTP and DHCP Parameters 129
- 130
- BOOTP Address Parameters 131
- 114070 Rev. B A-23 133
- A-24 114070 Rev. B 134
- RARP Interface Parameters 136
- RARP Address Parameters 136
- 114070 Rev. B A-27 137
- Appendix B 139
- Default Parameter Settings 139
- (continued) 140
- RARP Parameters 143
- 114070 Rev. B Index-1 145
- 114070 Rev. B Index-3 147
Relacionado con productos y manuales para Software Avaya Configuring SNMP, RMON, BOOTP, DHCP, and RARP Services
Software Avaya Configuring Traffic Filters and Protocol Prioritization Manual de usuario
(162 paginas)
(162 paginas)
Software Avaya Nortel Business Communications Manager 450 1.0 Administration and Security Manual de usuario
(200 paginas)
(200 paginas)
Software Avaya BCM 4.0 Manual de usuario
(398 paginas)
(398 paginas)
Software Avaya Business Communications Manager - Multimedia Contact Center Manual de usuario
(38 paginas)
(38 paginas)
Software Avaya Media Processing Server Series Alarm Reference Manual (Software Release 2.1) Manual de usuario
(452 paginas)
(452 paginas)
Software Avaya Configuring Traffic Filters and Protocol Prioritization Manual de usuario
(162 paginas)
(162 paginas)
Software Avaya RMON2 Manual de usuario
(108 paginas)
(108 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.068 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales