
Parameter Descriptions
114071 Rev. A A-9
Parameter: TI More
Path: Protocols > Global Protocols > Telnet Server > Global
Default: Enable
Options: Enable
| Disable
Function: Specifies whether the Technician Interface pauses after each screen fills with
data.
Instructions: Select Enable to configure the Technician Interface to pause after each screen
fills with data. Select Disable to configure the Technician Interface not to pause
after each screen fills with data.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.7.1.4
Parameter: TI Prompt
Path: Protocols > Global Protocols > Telnet Server > Global
Default: None
Range: 1 to 18 alphanumeric characters
Function: Specifies the character string used as the login prompt on the Telnet Technician
Interface console screen.
Instructions: Specify a character string.
Site Manager disconnects the current session if you modify the TI Prompt
parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.7.1.5
Parameter: Login Timeout (min.)
Path: Protocols > Global Protocols > Telnet Server > Global
Default: 1 minute
Options: 1 through 99 minutes (99 = infinity)
Function: Specifies the number of minutes that can elapse before the Technician Interface
disconnects the Telnet session if you do not enter a login ID at the login prompt.
Instructions: Accept the default value (1 minute) or specify a different value.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.7.1.6
Comentarios a estos manuales