Avaya Configuring IP Utilities (308631-14.20 Rev 00) Manual de usuario descargar pdf (Pagina 31)

Starting IP Utilities

308631-14.20 Rev 00

1-9

retry-count 5

retry-timeout 5

state enabled

Using Site Manager

To start TFTP from Site Manager, first complete the following tasks in local mode

to create a configuration file:

After you create the configuration file on your workstation, you must transfer this

file to the router for TFTP to be enabled.

Starting Telnet Services

You can use the BCC or Site Manager to configure Telnet services on the router,

accepting default values for all parameters. If you decide to change some or all of

the default values, see Chapter 6, “Customizing Telnet Services.”

Before you begin, verify that IP is configured on a router interface. For

instructions, see “

Verifying that IP Is Configured on a Router Interface” on page

1-5. If IP is not yet configured, see “Configuring IP for Global Protocols” on

page 1-2

for instructions.

Using the BCC

To configure Telnet on the router, you must:

1. Start a Telnet server.

2. Start a Telnet client.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose Protocols.

The Protocols menu opens.

2. Choose IP. The IP menu opens.

3. Choose TFTP. A confirmation window opens.

4. Choose Create. Site Manager enables TFTP on the

router.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 245 246

Sin comentarios

Avaya Configuring IP Utilities (308631-14.20 Rev 00) Manual de usuario Pagina 31