Avaya Configuring and Managing Routers with Site Manager Manual de usuario descargar pdf (Pagina 139)

Booting the Router

309081-14.20 Rev 00

4-5

For a router with multiple volumes, specify the volume for the boot image

and the volume for the configuration file.

a. Click in the volume box for the boot image (not the box that displays

the name of the boot image file, for example, bn.exe).

A menu lists all available volumes.

b. Choose the volume with the boot image that you want to use.

c. To boot with a different image file, type the file name in the field next

to the volume box.

d. Repeat steps a through c for the configuration file volume and name.

3. Click on Boot.

A confirmation window appears.

4. Click on OK.

The router boots using the router software image and the configuration file

you specified. Wait a few minutes for the router to boot.

5. In the Site Manager main window, choose View > Refresh Display to

verify that the router booted correctly.

If the router booted correctly, the new system information appears in the Site

Manager main window.

If Site Manager does not display system information, the router did not boot

successfully. Contact your local Nortel Networks Technical Solutions Center

for assistance.

If you can no longer access the router with Site Manager, see Using

Technician Interface Software for instructions on using the Technician

Interface to access the router. Contact your local Nortel Networks Technical

Solutions Center for assistance.

If you are confident the configuration file is stable, go to the next section,

“Copying and Renaming the Configuration File.”

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 385 386

Sin comentarios

Avaya Configuring and Managing Routers with Site Manager Manual de usuario Pagina 139