Avaya Configuring RADIUS Manual de usuario descargar pdf (Pagina 86)

100

Configuring RADIUS

C-10

308640-14.00 Rev 00

To create a backup circuit, complete the following tasks:

Refer to Configuring Dial Services for more information about dial backup

circuits.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

select

Backup Circuits > PPP

The Primary Circuit Definition window

opens, which lists the leased circuits that

you have configured.

2. Select a circuit entry and click on

Cct

Type

The Circuit Options window opens.

3. Enter

Primary

for the Circuit Type

parameter.

4. Enter the

ID of the backup pool

that this

circuit should use.

5. Click on

. The Primary Circuit Definition window,

which shows the parameter defaults

supplied by Site Manager, reopens.

6. Repeat Steps 2 through 5 to specify

additional primary circuits.

7. Scroll down the Primary Circuit Definition

window to the

Backup Mode

parameter.

8. Select a value for the

Backup Mode

parameter. The default is Master.

If this router is the master router, the peer

router’s backup mode must be set to

Slave. If you set the backup mode to

Slave, Site Manager prompts you for

caller resolution information so the slave

router can verify the identity of a remote

caller.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 99 100

Comentarios a estos manuales

Sin comentarios

Avaya Configuring RADIUS Manual de usuario Pagina 86

Comentarios a estos manuales

Relacionado con productos y manuales para Manuales de software Avaya Configuring RADIUS