Avaya Configuring LNM Services Manual de usuario descargar pdf (Pagina 40)

Configuring LNM Services

2-4

303534-A Rev 00

Internal MAC Address

Internal MAC Address is an LNM Servers interface-level parameter. You must

enter an internal MAC address when you initially add an LNM Servers interface

to the router configuration.

The only requirement for the Internal MAC Address parameter is that its value

always be unique within the associated source routing network. For information

about how to access or edit this parameter, refer to Chapter 4, “Editing LNM

Servers Parameters.”

External MAC Address

Each circuit on which you need to configure an LNM Servers interface has an

associated MAC address on the locally attached token ring segment. You set this

address by means of the MAC Address Select parameter of the circuit associated

with that segment. You can access the MAC Address Select parameter by means

of the following procedure:

Select Circuits

Edit Circuit from the Configuration Manager window.

(This invokes the Circuits List window.)

In the Circuits List window, click on the name of a circuit on which you

want to configure an LNM Servers interface.

Click on Edit in the Circuits List window. (This invokes the Circuit

Definition window.)

From the Circuit Definition window, select Lines

Edit Line to access the

MAC Address Select parameter.

The MAC Address Select parameter allows three options:

•BOXWIDE

• PROM (Default setting)

•CNFG

Caution:

Do not use the BOXWIDE option of the MAC Address Select

parameter associated with any circuit on which you wish to configure an LNM

Servers interface. If you do, the IBM LAN Network Manager application is

unable to differentiate between LNM Servers on different circuits of a Bay

Networks router.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 61 62

Sin comentarios

Avaya Configuring LNM Services Manual de usuario Pagina 40