Avaya Configuring Data Compression Services Manual de usuario descargar pdf (Pagina 48)

Configuring Data Compression Services

4-12

Parameter: Engine Type

Default: Inherit from Line

Options: Software | Hardware | Inherit from Line

Function: Determines whether compression for this node will be software- or

hardware-based. You can use hardware compression with Frame Relay

and PPP only. You can use software compression with Frame Relay, PPP,

or X.25.

Instructions: Select Inherit from Line if you want to accept the value in effect for the

WCP Engine Type line parameter. Otherwise, select Software to use

software-based compression or select Hardware to use Hardware-based

compression.

MIB Object ID: 1.3.6.1.4.1.18.3.4.22.1.1.8

Deleting Data Compression from a Platform

To delete WCP from all circuits on which it is currently conﬁgured, complete the

following steps:

1. From the Conﬁguration Manager window (refer to Figure 4-1), select

Protocols➔WCP➔Delete WCP.

A window pops up and prompts

Do you REALLY want to delete WCP?

2. Click on OK.

Site Manager returns you to the Conﬁguration Manager window. WCP is no

longer operating on the platform.

1 2 ... 43 44 45 46 47 48 49 50 51 52

Sin comentarios

Avaya Configuring Data Compression Services Manual de usuario Pagina 48