Avaya Configuring ATM DXI Services Manual de usuario Pagina 49

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 78
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 48
114057 Rev. A 3-1
Chapter 3
ATM DXI Window Basics
This chapter provides some guidelines for using Site Manager ATM DXI
windows. For more detailed instructions on specific Site Manager buttons or menu
selections, refer to Using Site Manager Software.
Adding or Copying PVCs
When adding or copying a PVC, keep the following in mind:
Whether you add or copy a PVC, you can always customize it later.
When you run PVCs in direct or hybrid access mode, the copy function copies
all of the existing PVC-specific information to the new PVC. However, this
function does not copy the protocols that you have selected and configured for
that PVC. You must reselect and reconfigure any desired protocols for the
newly copied PVC.
Setting PVCs for Multipath Mode
Setting PVCs in Multipath Mode provides a form of redundancy. For example, if
there are two physical lines and one line fails, the other takes over transmission
(redundancy). If both lines are working, the router uses both lines simultaneously
(multipath).
Vista de pagina 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 77 78

Comentarios a estos manuales

Sin comentarios