Avaya Using Bay Command Console Software Manual de usuario descargar pdf (Pagina 33)

115976-A Rev. A 2-1

Chapter 2

Learning to Use the BCC Interface

Entering and Exiting the BCC Interface

To access the BCC command line interface, ﬁrst open a Technician Interface

session with the target device from

• An ASCII terminal (for example, a VT-100 device) locally attached to the

console port of the router

• A workstation or PC running terminal emulation software and locally

attached to the console port of the device

• A remote workstation or PC running Telnet

Proceed as follows:

1. To access the Technician Interface on a Bay Networks router, enter the

Manager command at the Login prompt that appears in your Telnet or

console display:

Since the BCC enables you to perform device conﬁguration, you cannot

access the BCC command line from a User login, which limits access to

device read-only commands. The Manager login entry allows you to enter any

Technician Interface or BCC commands.

2. When you see the Technician Interface (console or Telnet) prompt, enter

the command

bcc-trial to start the BCC interface.

router1> bcc-trial

bcc>

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 111 112

Sin comentarios

Avaya Using Bay Command Console Software Manual de usuario Pagina 33