Avaya Using Bay Command Console Software Manual de usuario Pagina 104

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 112
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 103
Using the Bay Command Console
4-16 115976-A Rev. A
to-as/14/announce all> accept "accept-192.168.0.0" Add a BGP accept policy called
“accept-192.168.0.0”.
accept/accept-192.168.0.0> action accept
accept/accept-192.168.0.0> from-as 14 Accept routes from AS 14.
from-as/14/accept-192.168.0.0> cwc .. Go back to the previous level in the
configuration tree. Specify the addresses
you want to accept from AS 14.
accept/accept-192.168.0.0> network address 192.168.0.0
mask 255.255.0.0 match range
network/accept-192.168.0.0/192.168.0.0/255.255.0.0/Range
> info Verify the values currently assigned to this
context.
group {accept/accept-192.168.0.0}
address 192.168.0.0 Only addresses starting with 192.168.x.x will
be accepted.
mask 255.255.0.0
match Range
polname accept-192.168.0.0
network/accept-192.168.0.0/192.168.0.0/255.255.0.0/Range
> cwc .. Go back to the previous level in the
configuration tree.
accept/accept-192.168.0.0> info Verify the values currently assigned to
attributes of the accept policy
accept/accept-192.168.0.0.
group {/jointfilesconvert/96390/bgp}
state enabled
sub-protocols {from-as/14/accept-192.168.0.0 network/
accept-192.168.0.0/192.168.0.0/255.255.0.0/Range}
polname accept-192.168.0.0
action accept
preference 1
precedence 0
origin any
local-preference 0
/jointfilesconvert/96390/bgp-preference 1
Prompts, Commands, and Responses Comments
Vista de pagina 103

Comentarios a estos manuales

Sin comentarios