Avaya Configuring SMDS Manual de usuario descargar pdf (Pagina 43)

Editing SMDS Parameters

117361-A Rev. A 4-7

Parameter: Enable Incoming Address Screening

Default: Disable

Options: Enable

| Disable

Function: Enables the router to verify the individual and group addresses that it

receives in the incoming frames and drop any improperly addressed

frames. It ensures that the router receives only trafﬁc intended for it.

If the router rejects an address, one of three things may be happening:

• You did not conﬁgure the SMDS addresses according to the numbers

the service provider assigned.

• The network is forwarding trafﬁc to the router unnecessarily. Notify

the network provider.

• If the router shares a network entry point with another device, the

router may be receiving that device’s trafﬁc.

Instructions: Set to Enable if you want the router to check incoming addresses and

control the calls it receives. If not, accept the default, Disable. To

determine whether the router is rejecting addresses, use the Technician

Interface script

show smds stats. Refer to Using Technician Interface

Scripts for more information.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.3.1.17

Deleting SMDS from the Router

To delete SMDS from all router circuits, complete the following steps:

1. From the Conﬁguration Manager window (refer to Figure 4-1), select

Protocols > SMDS > Delete SMDS.

The Conﬁguration Manager prompts

Do you REALLY want to delete SMDS?

2. Click on OK.

The Conﬁguration Manager returns you to the Conﬁguration Manager

window. SMDS is no longer conﬁgured on the router.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48

Sin comentarios

Avaya Configuring SMDS Manual de usuario Pagina 43